| Code | Description | Unit | General Rate |
|---|---|---|---|
| 4412-10 | Of bamboo: | — | 0% |
| 4412-10-10 | Plywood | cu | 0% |
| 4412-10-2 | Containing at least one layer of particle board: | — | 0% |
| 4412-10-21 | Goods, as follows: (a) with at least one outer ply of non-coniferous wood (including bamboo);(b) with at least one ply of tropical wood specified in Additional Note 2 to this Chapter | cu | 0% |
| 4412-10-29 | Other | cu | 0% |
| 4412-10-30 | Other, with at least one ply of tropical wood specified in Additional Note 2 to this Chapter | cu | 0% |
| 4412-10-90 | Other | cu | 0% |
| 4412-3 | Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: | — | 0% |
| 4412-31-00 | With at least one outer ply of tropical wood | — | 5% |
| 4412-31-00 | .Not exceeding 7 mm in thickness | cu | 0% |
| 4412-31-00 | .Exceeding 7 mm in thickness | cu | 0% |
| 4412-31-00 | Interior glueline, NSA | cu | 0% |
| 4412-31-00 | ..Not exceeding 7 mm in thickness | cu | 0% |
| 4412-31-00 | ..Exceeding 7 mm in thickness | cu | 0% |
| 4412-31-00 | .Other | cu | 0% |
| 4412-33-00 | Other, with at least one outer ply of non‑coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.) | — | 5% |
| 4412-33-00 | .Not exceeding 7 mm in thickness | cu | 0% |
| 4412-33-00 | .Exceeding 7 mm in thickness | cu | 0% |
| 4412-33-00 | Interior glueline, NSA | cu | 0% |
| 4412-33-00 | ..Not exceeding 7 mm in thickness | cu | 0% |
| 4412-33-00 | ..Exceeding 7 mm in thickness | cu | 0% |
| 4412-33-00 | .Other | cu | 0% |
| 4412-34-00 | Other, with at least one outer ply of non‑coniferous wood not specified under 4412.33.00 | — | 0% |
| 4412-34-00 | .Not exceeding 7 mm in thickness | cu | 0% |
| 4412-34-00 | .Exceeding 7 mm in thickness | cu | 0% |
| 4412-34-00 | Interior glueline, NSA | cu | 0% |
| 4412-34-00 | ..Not exceeding 7 mm in thickness | cu | 0% |
| 4412-34-00 | ..Exceeding 7 mm in thickness | cu | 0% |
| 4412-34-00 | .Other | cu | 0% |
| 4412-39-00 | Other, with both outer plies of coniferous wood | — | 5% |
| 4412-39-00 | Overlaid (including form ply) | cu | 0% |
| 4412-39-00 | Interior glueline, NSA | cu | 0% |
| 4412-39-00 | Exterior glueline, NSA | cu | 0% |
| 4412-4 | Laminated veneered lumber (LVL): | — | 0% |
| 4412-41 | With at least one outer ply of tropical wood: | — | 0% |
| 4412-41-10 | With at least one outer ply of tropical wood specified in Additional Note 2 to this Chapter other than: (a) Mandio-queira; and(b) Pau amarelo; and(c) Quaruba; and(d) Tauari | cu | 0% |
| 4412-41-90 | Other | cu | 0% |
| 4412-42-00 | Other, with at least one outer ply of non‑coniferous wood | cu | 5% |
| 4412-49-00 | Other, with both outer plies of coniferous wood | cu | 5% |
| 4412-5 | Blockboard, laminboard and battenboard: | — | 0% |
| 4412-51 | With at least one outer ply of tropical wood: | — | 0% |
| 4412-51-10 | With at least one outer ply of tropical wood specified in Additional Note 2 to this Chapter other than: (a) Mandio-queira; and(b) Pau amarelo; and(c) Quaruba; and(d) Tauari | cu | 0% |
| 4412-51-90 | Other | cu | 0% |
| 4412-52-00 | Other, with at least one outer ply of non‑coniferous wood | cu | 0% |
| 4412-59-00 | Other, with both outer plies of coniferous wood | cu | 0% |
| 4412-9 | Other: | — | 0% |
| 4412-91 | With at least one outer ply of tropical wood: | — | 0% |
| 4412-91-10 | Not containing any layers of particle board or plywood with at least one outer ply of tropical wood specified in Additional Note 2 to this Chapter other than: (a) Mandio-queira; and(b) Pau amarelo; and(c) Quaruba; and(d) Tauari | cu | 0% |
| 4412-91-20 | Goods containing at least one layer of particle board and one of the following woods (other than plywood): (a) Mandio-queira;(b) Pau amarelo;(c) Quaruba;(d) Tauari | cu | 0% |
| 4412-91-30 | Goods, NSA, that (a) contain at least one layer of particle board; or(b) are plywood | cu | 5% |
| 4412-91-90 | Other | cu | 0% |
| 4412-92 | Other, with at least one outer ply of non‑coniferous wood: | — | 0% |
| 4412-92-10 | Goods, NSA, that: (a) contain at least one layer of particle board; or(b) are plywood | cu | 5% |
| 4412-92-90 | Other | cu | 5% |
| 4412-99 | Other, with both outer plies of coniferous wood | — | 0% |
| 4412-99-10 | Other, containing one layer of particle board | cu | 0% |
| 4412-99-20 | Plywood | cu | 5% |
| 4412-99-90 | Other | cu | 5% |
These Free Trade Agreements may offer reduced duty rates for HS 4412 products:
| Agreement | Typical Rate | Countries |
|---|---|---|
| ASEAN-Australia-New Zealand Free Trade Agreement | 0% | BRN, IDN, KHM, LAO, MMR, MYS, NZL, PHL, SGP, THA, VNM |
| Australia-Chile Free Trade Agreement | 0% | CHL |
| Australia-Hong Kong Free Trade Agreement | 0% | HKG |
| Australia-India Economic Cooperation and Trade Agreement | 0% | IND |
| Australia-New Zealand Closer Economic Relations Trade Agreement | 0% | NZL |
| Australia-UAE Comprehensive Economic Partnership Agreement | 0% | ARE |
| Australia-United Kingdom Free Trade Agreement | 0% | GBR |
| Australia-United States Free Trade Agreement | 0% | USA |
| China-Australia Free Trade Agreement | 0% | CHN |
| Comprehensive and Progressive Agreement for Trans-Pacific Partnership | 0% | BRN, CAN, CHL, JPN, MEX, MYS, NZL, PER, SGP, VNM, GBR |
| Indonesia-Australia Comprehensive Economic Partnership Agreement | 0% | IDN |
| Korea-Australia Free Trade Agreement | 0% | KOR |
| Regional Comprehensive Economic Partnership | 4% | BRN, CHN, JPN, KHM, KOR, LAO, NZL, SGP, THA, VNM, IDN, PHL, MMR, MYS |
| Thailand-Australia Free Trade Agreement | 0% | THA |
Heading 4412 belongs to Chapter 44 in Section IX (Wood and articles of wood; cork and articles of cork).
Important
Rates shown are general (MFN) duty rates. Total landed cost includes GST (10% on CIF + duty), Import Processing Charge ($50-
The general (MFN) duty rate for HS 4412 (Plywood, veneered panels and similar laminated wood) is 0%. Preferential rates may be available under 14 Free Trade Agreements.
There are 58 statistical codes under heading 4412 in the Australian tariff schedule. See the full table below for rates and descriptions.
Get the total landed cost for HS 4412 — duty, GST, IPC, and biosecurity included.