| Code | Description | Unit | General Rate |
|---|---|---|---|
| 7306-1 | Line pipe of a kind used for oil or gas pipelines: | — | 0% |
| 7306-11-00 | Welded, of stainless steel | t | 5% |
| 7306-19-00 | Other | — | 5% |
| 7306-19-00 | .Not exceeding 88.9 mm external diameter | t | 0% |
| 7306-19-00 | .Exceeding 88.9 mm but not exceeding 165.1 mm external diameter | t | 0% |
| 7306-19-00 | .Exceeding 165.1 mm external diameter | t | 0% |
| 7306-19-00 | Other | t | 0% |
| 7306-2 | Casing and tubing of a kind used in drilling for oil or gas: | — | 0% |
| 7306-21-00 | Welded, of stainless steel | t | 5% |
| 7306-29-00 | Other | t | 5% |
| 7306-30-00 | Other, welded, of circular cross-section, of iron or non-alloy steel | — | 5% |
| 7306-30-00 | Not exceeding 21 mm external diameter | t | 0% |
| 7306-30-00 | .Wall thickness not exceeding 2.5 mm | t | 0% |
| 7306-30-00 | .Wall thickness exceeding 2.5 mm but not exceeding 3.6 mm | t | 0% |
| 7306-30-00 | .Wall thickness exceeding 3.6 mm | t | 0% |
| 7306-30-00 | .Wall thickness not exceeding 3.2 mm | t | 0% |
| 7306-30-00 | .Wall thickness exceeding 3.2 mm but not exceeding 4.5 mm | t | 0% |
| 7306-30-00 | .Wall thickness exceeding 4.5 mm | t | 0% |
| 7306-30-00 | Exceeding 114.3 mm but not exceeding 165.1 mm external diameter | t | 0% |
| 7306-30-00 | Exceeding 165.1 mm external diameter | t | 0% |
| 7306-40-00 | Other, welded, of circular cross-section, of stainless steel | t | 5% |
| 7306-50-00 | Other, welded, of circular cross-section, of other alloy steel | t | 5% |
| 7306-6 | Other, welded, of non-circular cross-section: | — | 0% |
| 7306-61-00 | Of square or rectangular cross-section | — | 5% |
| 7306-61-00 | ..Wall thickness not exceeding 2 mm | t | 0% |
| 7306-61-00 | ..Wall thickness exceeding 2 mm | t | 0% |
| 7306-61-00 | .Exceeding 279.4 mm perimeter | t | 0% |
| 7306-61-00 | Other | t | 0% |
| 7306-69-00 | Of other non-circular cross-section | t | 5% |
| 7306-90-00 | Other | t | 5% |
These Free Trade Agreements may offer reduced duty rates for HS 7306 products:
| Agreement | Typical Rate | Countries |
|---|---|---|
| ASEAN-Australia-New Zealand Free Trade Agreement | 0% | BRN, IDN, KHM, LAO, MMR, MYS, NZL, PHL, SGP, THA, VNM |
| Australia-Chile Free Trade Agreement | 0% | CHL |
| Australia-Hong Kong Free Trade Agreement | 0% | HKG |
| Australia-India Economic Cooperation and Trade Agreement | 0% | IND |
| Australia-New Zealand Closer Economic Relations Trade Agreement | 0% | NZL |
| Australia-UAE Comprehensive Economic Partnership Agreement | 3% | ARE |
| Australia-United Kingdom Free Trade Agreement | 0% | GBR |
| China-Australia Free Trade Agreement | 0% | CHN |
| Comprehensive and Progressive Agreement for Trans-Pacific Partnership | 0% | BRN, CAN, CHL, JPN, MEX, MYS, NZL, PER, SGP, VNM, GBR |
| Indonesia-Australia Comprehensive Economic Partnership Agreement | 0% | IDN |
| Korea-Australia Free Trade Agreement | 0% | KOR |
| Malaysia-Australia Free Trade Agreement | 0% | MYS |
| Regional Comprehensive Economic Partnership | 0% | BRN, CHN, JPN, KHM, KOR, LAO, NZL, SGP, THA, VNM, IDN, PHL, MMR, MYS |
| Singapore-Australia Free Trade Agreement | 0% | SGP |
| Thailand-Australia Free Trade Agreement | 0% | THA |
Heading 7306 belongs to Chapter 73 in Section XV (Base metals and articles of base metal).
Important
Rates shown are general (MFN) duty rates. Total landed cost includes GST (10% on CIF + duty), Import Processing Charge ($50-
The general (MFN) duty rate for HS 7306 (Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel) is 0%. Preferential rates may be available under 15 Free Trade Agreements.
There are 30 statistical codes under heading 7306 in the Australian tariff schedule. See the full table below for rates and descriptions.
Get the total landed cost for HS 7306 — duty, GST, IPC, and biosecurity included.